Monday, October 10, 2011

Missing in action but back again...

Things have been quiet on the blog for the past month as I have been off work looking after my wife Chris as she had a hip joint replacement, makes you suddenly feel old. She had been having increasing leg pain over the previous year and we put it down to sciatica as she has a bad back. Eventually we got her to see about it and after the usual weeks waiting to see the specialist he went through the roof and scheduled her for the operation on 6 October. Now that obviously didn't happen as he rang us two days after that first visit to ask if she could be in hospital the next day, it was that bad.
All is well now, she can manage quite well and I returned to work today but she won't be back to work for another month or two.
Although I was the apprentice chief cook and bottle washer I soon got things under control and managed to get into the garage now and again. My previous GSV sheep van chassis post  was done during one of these moments.
What have I been up to since?
Well, I have been playing with Decoder Pro and the Soundtraxx Tsunamis in my steam locos trying to extract more of the good stuff from them. I now have several locos that will chuff heavily as they move away and then the chuff will almost disappear as they start to cruise along. Also if they come to a grade they will start to chuff heavily again as the Tsunami senses the load coming on. Similarly if the chuff will drop away as they drift down a grade. All very satisfying and I want to point out that when the chuff drops to a drift and increases again I am not changing the throttle unless of course I was starting or stopping.
Here is a quick and rough video of the effects.
I had been trying to achieve this effect for some time and finally worked it out.
First up you need to put some momentum into the loco and as I use the NCE ProCab I used 6 in the 0 - 9 range accessible from the momentum button. I should also mention that the NCE command station can be set up to have half the momentum acceleration setting when decelerating or a one to one relationship, I use the one to one so acceleration and deceleration settings are the same if using the ProCab momentum button. Note that the use of the momentum button on the cab will overwrite any CV 3 and CV 4 momentum settings in the locomotive but I use the button to try to replicate the load that is behind the locomotive, I use a low setting of 2 or 3 for just the locomotive when running 'light'.
The difference this time around is that one of the BEMF CVs has to be set to 0, this is CV 212 which is the Motor Control Intensity CV on the Advanced tab, then CV 188 on the DDE tab (Dynamic Digital Exhaust) has to be adjusted until you get the right responses, this might come down to adjusting CV188 by as little as only one or two once you are in the 'ballpark' area.
It seems that CV 212 turns off BEMF to the motor as the response returns to being like a no BEMF loco but some sort of sensing of the motor load is going on so maybe it is only half turned off, who knows?
It really comes down to adjust CV188, test and listen, then do it again and again until you zero in on the right value. I found that around 60 was a good starting point.
Other DDE sound CVs also need to be adjusted and there is no easy way to explain this, just try it out.
Here is a link to my Decoder Pro file for my Austrains C36 set up for auto chuffing.
The down side of the auto chuff is that without the BEMF it doesn't keep in time too well and I installed a can chuff arrangement which is much more realistic.
And here is a link for the same C36 set up for a cam operated chuff (perhaps a subject for another blog).
It appears that as each model loco is a bit different that you may have to play with the CVs for your own Austrains C36 but have a go you might like it.
If you don't like it then just use Decoder Pro to reinstate your own settings (assuming you saved them in Decoder Pro first.
Other locos I have done by copying and modifying the C36 file are 2 Trainorama C32s, and 2 brass D50s so it will be interesting watching at the next Bylong operating session when the boys start to run them.

Tuesday, September 13, 2011

A not so new GSV sheep van

I recently noticed that Casula Hobbies had released four axle packs of 10.5mm disc wheels in 23.8, 25.0 and 26.0mm axle lengths which gave me an idea. Spoked 26mm axles are also available and I heard a whisper that spoked 23.8mm axles may be available in the future which would be great for this project and others.
Some years ago I purchased a number of Austrains S trucks so that I could use their removable chassis on my Protype four wheel wagons. In my usual fashion I converted a CV van and stopped there.
Now though I had an idea and bought some 23.8mm axles from Casula Hobbies.
My idea was to try them out under a Camco NSWGR GSV sheep van as the original chassis was made very wide to suit the axle lengths available when first produced.
Now the S truck chassis is wider of course but as it is removable I used a motor tool with a wide (approx. 1mm) stone cutting disc to cut it down its long length through the centre of the chassis. I also filed the edges of the steel weight to fit within the new narrrow chassis.
The two longitudinal ridges on the underside of the GSV floor that represent the inner chassis members of the GSV were clipped off with small transistor side cutters and then filed flat to the rear of the coupler mounts, the mounts were left as is.
The 23.8mm axles were held in place between the S truck chassis pieces and marks were made on the under side of the GSV floor in the four holes at each corner of the S truck chassis.  I attached the S truck chassis to the floor using a small self tapping screw through each of the four holes at each corner of the chassis. The rest of the van was assembled as per the instructions and painted dark grey.
After painting I applied some clear gloss to the number boards and chassis areas where the van numbers were to go. I found that the decals needed a coat of Microscale Liquid Decal Film, a clear liquid that gives an extra coating to hold old or suspect decals together.
I fitted Kadee scale head whisker couplings and followed this with some pastel dry colour weathering and here is the result compared to a GSV built as supplied.
Yes, I know, I will fix the brake handle now that the GSV looks so good.

Tuesday, August 30, 2011

Amazing what you find on the net

While cruising the net this evening I stumbled across these two videos on YouTube.

Video 1      Video 2

Although I have driven through the Bylong area about 15 years ago and have some video I didn't notice the reddish colour of some of the soil so I will have to add a little here and there to correct this on the layout.

I also note the large number of small trees and bushes close to the track, I might add a few more to the layout but since 1965 was in drought I think that most of my scenery will be fine, although my backscenes are too green apparently (not that I knew about the drought when I painted them).

That's about it for the moment.

Tuesday, August 9, 2011

Austrains FS/BS Rolling and Weight Problems Solved

Rolling
I have been working on my Austrains FS and BS carriages to reduce their weight and to improve their rolling capability.
The following is a simple and quick method to achieve this.
Begin by disassembling the coach, a little bit of leverage on the bottom edge of the body will release it from the retaining clips. Remove the two screws that hold the lighting board on then do the same with the three very small screws that attach the interior partitions to the chassis.
At this stage you will see two long steel weights that also act as part of the pick up circuit for the lighting.
Unsolder the two fine wires, you will need a hot soldering iron or alternatively snip them at the solder joint with the steel.


Next cut four small pieces of shim brass (clean and polished) about 25mm long and wide enough to sit in the floor groove (see photo below).
Super glue the shims over the holes where the small pickup springs come through the floor, you will need some weights to hold the shim against the floor while it sets.
Solder some wire between the two brass shims on each side. I used straight brass wire that I made by stretching some picture hanging wire between a vice and a pair of pliers. Finally solder on the wires from the switch.


I took the opportunity while the coach was apart to paint the interior a mid-brown wood colour with maroon seats for the FS and dark green seats for the BS.
Reassemble the coach.
Now to improve the rolling, turn the coach upside down and using a small jewellers screwdriver lever the inner brake shoe casting up and out from the two retaining clips.
Chamfer the inner rear edge of each brake shoe (closest to the wheel flange) as it appears that this is where the brakes are touching the flange and where the resulting squeaking comes from.


Clip the castings back into the bogie and you are ready to see it roll.
The casting can be tricky to get back into the retaining clips and the small screwdriver can assist in pushing it gently until it clips into place. It has a tendency to want to lay over but perservere and you will get the trick of it.

Weight
The coach originally weighed 155 grams but now only weighs 105 grams.
Now as it comes the mass of this coach is to the HO NMRA Recommended Practice RP-20.1 which is 1 ounce of weight plus another half ounce for each real 1 inch in model length.
The FS and BS are 9 inches long so that is 5 1/2 ounces which is 155 grams, spot on.
However, as we have found, this is too heavy for our HO NSWGR steam locomotives even without the built in braking.
I use wagon and coach mass formulas that are the result of experiments carried out with Terry Flynn back in the 1980's on my BYLONG layout with 4 wheel wagons at the front of very long trains on 1 in 40 falling and climbing grades.
The formulas were developed to try to get realistic train lengths with model NSWGR steam locomotives as the NMRA weighting formula does not work for our small steamers and also doesn't work for 4 wheel wagons and is overall, too heavy .
For passenger coaches I use a weighting formula of 1.8 grams per foot of body length +/- 10% so the FS and BS just pass the minimum mass of 105 grams, a little more mass could be added with some HO scale passengers.
I also use a goods wagon weighting formula that is 2 grams per foot of body length +/- 10%.
Terry has similar formulas on his web site here (just close the pop up windows that are a part of his free web site).
As trains on my BYLONG layout are banked from the rear over much of the mainline length on grades of 1 in 40, I feel that this is a formula that works.
One proviso - Get as much weight as you can into 4 wheel wagons as an empty wagon can be a challenge to even get to the minimum of my range let alone the NMRA RP-20.1.

Operation
I tested these FS and BS coaches in a passenger train with an Austrains NSWGR C36 class and found that I could not get 1 Austrains FS, 1 Lima MBE, 1 Powerline FS and a Powerline MHO up my final ruling 1 in 40 grade. This grade start out as 1 in 40 but has a curve near the top which challenges the locos.
After the above modifications the C36 could pull the Lima MBE, Powerline FS, 2 Austrains FS, 1 Austrains BS and the Powerline MHO, quite a change.
I should note that the C36 had the front bogie spring removed and some sheet lead in the cab roof for both tests.

Here is an Excel spreadsheet that calculates the formulas for a range of existing passenger coaches and wagons.

I leave the above weighting formula for you to ponder on.

Monday, July 11, 2011

More Roundhouse Information

Well, "ask and ye shall receive", James Black has come to my/our rescue with two plans of this type of roundhouse and a series of photos of the Cowra loco shed taken in 2005 that show the lights between the last track and the side wall!
Thank you James, this information is very much appreciated and I am sure that there will be others out there who will be able to make great use of it.
Here are links to the two plans, click on the magnifying glass between the rotate icons to get a high resolution plan and then right click and click on Save Picture As to save to your own PC.
Plan 1
Plan 2
And here is the link to the photos of Cowra roundhouse in 2005.
Photos Untitled24 and Untitled25 show the side lights suspended from a beam that is between the wall truss and the next truss towards the track in the shed.
Another detail I notice is that the timbers aren't black as I would expect but more a dark reddish colour with an 'overspray' of black, just in time for my spraying.
Now James has caused me another problem! A couple of photos show the belt drive for lathes, etc. mounted on one end wall. I think I might draw the line now or I will never finish the shed (this wall will not be easily visible on the layout).
Thanks again James.

Sunday, July 10, 2011

Wollar Loco Shed - The next stage

While working on ideas for the lighting of the loco shed I had been pondering the construction of the smoke flues that sit above the end of the tracks to direct the smoke from the locos up and out of the shed.

I spent a few hours over the weekend building the smoke flues from Evergreen strip and scribed styrene.

The flues turned out to only be a small challenge and not as bad as I had been dreading.

Mounting them in the rafters was tricky however as the plan in Byways 7 shows the flues suspended between two trusses at around 6' apart but the kit rafters are 8' 6" apart. Without a full plan it is hard to know if the kit has the right number of rafters or if the Broken Hill shed in Byways 7 is simply a variation to the shed modelled in the kit.

Here are two views of the flues, one from the front and another through the rear windows.

Front view

View through rear windows

Being white and close with a lot of other framing running in all directions they were difficult to get the camera to focus on but I think you get the idea.
I needed to do the flues before the suspended lights as the lights will be very prone to damage and if bent will probably short out the LEDs due to conductive silver paint method I will use as per my previous post for the street lamp.
As can be seen from both photos I have yet to extend the tracks in the shed, I will probably leave this until the shed is finished as I also have to work out a plug and socket method of getting power to the shed LED lighting as the shed will be removable.

The kit as supplied has the floor and track bed built as a solid part of the shed which is good for track alignment with the turntable but it also means that a method has to be worked out if you want to get access into the shed. I think it would be best not to glue the floor to the walls which would make it very tricky when first starting to build the shed until the frame gets sufficiently cross braced to gain some strength. Tell me how I know this   ;-)

The next step will be to spray all the trusses, frames smoke flues, etc. prior to fixing the lights.

Wednesday, July 6, 2011

Yes, I got distracted

Well, I ended the last post with a mention of the hanging lights in the pictures of Lithgow shed. Investigations revealed that these were standard of course however I have been unable to find photos of the lights between the side of the shed and the first track. The lights in the Lithgow shed photo are on a main truss between each track and they only show at Lithgow because at least one bay has been removed opening up the inside to daylight. If anyone has a photo showing the lights towards the side walls I would be interested in seeing it.

While researching the lights I started to work out how I was going to light these shades when they are suspended on a thin piece of electrical conduit.

As an experiment, I have produced the following.

The first photo shows the new Wollar level crossing with a power pole and street light.


The second photo is a night scene.


How did I do it?

I used a surface mount 603 warm white LED with a Tichy lampshade, some brass wire and some conductive silver paint to get the power to the LED.

It involves conductive silver paint from one contact on the LED out, up and over the shade to the wire conduit and then down the pole to a 1K Ohm resistor and power wire. The brass wire conduit is then coated with super glue and allowed to harden for a day after which the conductive silver paint is painted from the other LED contact out and up over the lampshade, over the coated wire and down the other side of the pole to power wires under the pole. The power source is 12v DC.

Pretty cool!

I always was going to light the layout for night operation and this is my second light, the first being the Wollar loco depot yard light. I will slowly add lights around the layout. The more that you think about it the more places you realise that you need lights for.

The loco shed will be next but I also have to make three smoke flues that aren't included in the kit. luckily there is a plan in the article on Broken Hill Loco Depot in Byways of Steam 7.

Here is a photo of a smoke flue I received from Alex Nadalini. The actual chimney part has been removed as this shed is being torn down (Orange I believe - Cowra actually, see comment below from James Black).